24/7 Emergency AC Service

Troubleshooting · 10 November 2026

AC Not Cooling? 7 Causes and What to Do Before You Call

Most “no cooling” complaints have simple causes you can check in 5 minutes — dirty filters, wrong mode, or a tripped setting. Here is the full checklist.

AC Not Cooling? 7 Causes and What to Do Before You Call

6 min read · By the CoolAir team

1. Check the mode and temperature

It sounds obvious, but a third of no-cooling calls turn out to be the remote set to Fan or Dry mode, or the temperature set to 26°C on a 38°C day. Set Cool mode and 22–24°C, then wait 10 minutes.

2. Clean the filters

A clogged filter can cut airflow by half. Slide the filters out, wash them under running water, dry fully in shade, and refit. In Mumbai’s dust, do this every 2–3 weeks in summer.

3. Look at the outdoor unit

If the outdoor fan is not spinning or the unit is buried behind boxes and plants, the AC cannot throw heat out. Keep 1 foot of clear space around it and hose the fins gently from a distance.

4. Ice on the pipes means a problem

Ice on the copper pipes or indoor coil usually means low gas or blocked airflow. Switch the AC off for 30 minutes to thaw, clean the filter, and if ice returns, book a gas pressure check — do not keep running it.

When to call a technician

If the outdoor unit makes a humming noise but never starts, the MCB trips, or cooling fades within days of a gas refill, you need a professional diagnosis. Diagnosis is ₹299 and is adjusted in the repair bill.

Need a technician for this?

Book a visit — diagnosis from ₹299, same-day slots in Mumbai, Thane, Navi Mumbai & Pune.

Book a Service

Back to all guides

Keep reading